JANTEX DYEGAIN CONC EC1
25 in stock
Description: Jantex Dyegain Conc EC is a ready for use print chemical. When printed, cured and over-dyed, it causes the printed area to become darker in shade than the unprinted dyed ground. This gives a two-toned effect or look to the garment or goods.
Jantex Extender Dyegain EC is used to cut the strength of Jantex Dyegain Conc EC at the desired percent you wish to cut.
*See attached technical notes for additional information on variables experienced when using Dyegain and for dyeing suggestions and recommendations.
Application: Recommended mesh for Jantex Dyegain Conc EC is from 60-160. Product must be mixed well and cured for a minimum of 3-4 minutes at 300 degrees F. REMINDER: use Jantex Extender Dyegain EC only to cut strength.
**See attached notes on additional variables that can create issues with Dyegain printing. This product must be thoroughly tested even while in production due to these variables. No warranty is expressed or implied with the use of this product.
Properties Amber liquid paste. Neutral odor.
Clean Up: Clean up with water.
Storage: Keep from freezing and away from sunlight. Store between 55 degrees and 95 degrees F. Keep lid on when not in use. Limited shelf life.
Safety: Always wear protective eyewear and clothing when mixing color or chemicals. Refer to material Safety Data Sheet for additional handling and safety measures.