-
Vendor:Jantex Brand
JANTEX BINDER 45 NRF
Binders are the glues that bond the pigments to the fabric. There are a variety available that exhibit different properties. Straight acrylic binders are usually less expensive but may not impart as soft a hand as those blended such as styrene acrylic or acrylanitrile....- From $ 16.95
- From $ 16.95
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX BROWN 5801
Standard Pigments A standard line of pigments for use in a water based printing system. With over 15 colors available, this line offers a wide variety of color matching possibilities. Recommended ink loads should not exceed 8-10% of combined pigments. Jantex Concentrated Pigments A...- From $ 33.50
- From $ 33.50
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX BURNOUT #2
JANTEX BURN OUT: RECOMMENDED APPLICATION Jantex Burnout system is a print chemical designed to actually eat out the cotton content contained in the fabric. It is recommended that a cotton/poly plated blend of fabric be used to achieve the best see thru results. If...- From $ 15.60
- From $ 15.60
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX BURNOUT CARRIER #1
JANTEX BURN OUT: RECOMMENDED APPLICATION Jantex Burnout system is a print chemical designed to actually eat out the cotton content contained in the fabric. It is recommended that a cotton/poly plated blend of fabric be used to achieve the best see thru results. If...- From $ 12.10
- From $ 12.10
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX CONC JTS
Conc JTS is a premium thickening agent. Needs high speed homogenization to completely shear product and optimize thickening. Recommended use is approximately 3-4% by weight. Disclaimer: Auxiliary additives are not always needed in a print paste formula. Please test your particular fabric type for...- From $ 31.30
- From $ 31.30
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX CRACKLE WHITE
DESCRIPTION: Jantex Crackle White/Crack base gives cotton knit a “cracked look” after curing. APPLICATION: Print Jantex Crackle White in a very open mesh. For best results print, flash, cool, print and cure. Pull knit for crackle effect. SCREEN MESH: For best results use...- From $ 38.85
- From $ 38.85
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX DISCHARGE BASE JT
Jantex Discharge Base JT1 is used in a system to strip dyed ground shades and simultaneously replace them with a pigment color if desired. It is available in a standard base form. Prepare your print paste by adding the pigment concentrate to the discharge...- From $ 14.70
- From $ 14.70
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX FLUORESCENT BLUE JT2
Standard Pigments A standard line of pigments for use in a water based printing system. With over 15 colors available, this line offers a wide variety of color matching possibilities. Recommended ink loads should not exceed 8-10% of combined pigments. Jantex Concentrated Pigments A...- $ 46.85
- $ 46.85
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX FLUORESCENT GREEN JT2
Standard Pigments A standard line of pigments for use in a water based printing system. With over 15 colors available, this line offers a wide variety of color matching possibilities. Recommended ink loads should not exceed 8-10% of combined pigments. Jantex Concentrated Pigments A...- $ 40.25
- $ 40.25
- Unit price
- per
-
Vendor:Jantex Brand
JANTEX FLUORESCENT ORANGE JT2
Standard Pigments A standard line of pigments for use in a water based printing system. With over 15 colors available, this line offers a wide variety of color matching possibilities. Recommended ink loads should not exceed 8-10% of combined pigments. Jantex Concentrated Pigments A...- $ 43.15
- $ 43.15
- Unit price
- per
Free shipping is only available for local pickup.
Recently Viewed Products
- Choosing a selection results in a full page refresh.